Parity
When this option is set to None, parity checking is disabled. The parity bit, if used, provides a basic form of error detection. See your computer manual and software documentation for the proper setting.
Data length
Set the data length of the serial interface to 7 bit or 8 bit. See your computer manual and software documentation for the proper setting.
Parallel I/F bidirectional mode
The parallel interface bidirectional transfer mode is used when this feature is turned on. If bidirectional transfer mode is unnecessary, turn this off.
Packet mode
Select Auto to use the
Character table
You can select from among 13 to 36 standard character tables, depending on the country of purchase. See “Electronic” on page 112 for more information on the tables.
International character set for Italic table
You can select among several international character sets for the Italic character table. Each character set contains eight characters that vary depending on the country or language, so you can customize the Italic table to suit your printing needs.
Using the Printer | 21 |
