IEEE-488.2 Common Commands
This section describes the IEEE-488.2 Common Comm a nds i mplemented in the
Agilent E1446A. The table below shows the commands listed by f unc tional group;
however, commands are listed alphabetically in th e reference. Examples are shown
in the reference when the command has parameter s or returns a non-trivial response;
otherwise, the command string is as shown in the table. For additional information,
refer to IEEE Standard 488.2-1987.
Category Command Title
System Data *IDN? Identification Query
Internal Operations *LRN?
*RST
*TST?
Learn Device Setup Query
Reset Command
Self Test Query
Synchronizatio n *OPC
*OPC?
*WAI
Operation Complete Command
Operation Complete Command
Wait-to-Continue Command
Macro *DMC <name>,<data>
*EMC <enable>
*EMC?
*GMC? <name>
*LMC?
*PMC
*RMC <name>
Define Macro Command
Enable Macro Command
Enable Macro Que r y
Get Macro Contents Query
Learn Macro Query
Purge Macros Command
Remove Individual Macro Command
Status & Event *CLS
*ESE <mask>
*ESE?
*ESR?
*SRE
*SRE?
*STB?
Clear Status Command
Standard Event Status Enable Command
Standard Event Status Enable Query
Standard Event Status Register Query
Service Request E nable Command
Service Request E nable Query
Read Status Byte Query
Stored Settings *RCL
*SAV Recall Command
Save Command

IEEE-488.2 Common Commands Command Reference 3-25