Example Querying the Operation condition register
STAT:OPER? Query Operation condition register
:OPERation|QUEStionable:ENABleSTATus:OPERation|QUEStionable:ENABle <unmask> specifies which bits of
the associated event register are included in its summary bit. The summary bit is the
bit-for-bit logical AND of the event register and the unmasked bit(s).
Parameters Parameter
Name Parameter
Type Range of
Values Default
Units
unmask numeric or
non-decimal
numeric
0 through +32767 none
The non-decimal numeric forms are the #H, #Q, or #B formats specifie d by
IEEE-488.2.
Comments •Executable when initiated: Yes
•Coupling group: none
•Related commands: STATus subsystem, *SRE, *STB?
•*RST Condition: unaffected
•Power-on Condition: STATUS:OPERation|QUEStionable:ENABLE 0
:OPERation|QUEStionable[:EVENt]?STATus:OPERation|QUEStionable[:EVENt]? returns the co ntents of the
appropriate event register. Reading the r egister clears it to 0.
Comments •Both event registers are also cleared to 0 by the *CLS common command.
•Executable when initiated: Yes
•Coupling group: none
•Related commands: STATus subsystem, *SRE, *STB?
•*RST Condition: unaffected
•Power-on Condition: Both event registers are cleared to 0.
Example Querying the Operation event register
STATus :OPERation|QUEStionable:ENABle