•*RST Condition: none; macro defintions are unaffected
•Power-On Condition: no m acros are defined
Example Define macro to set ’Input 1’ impedance
*DMC "RESTART","INP1:IMP 50" Define macro
*EMC and *EMC?*EMC <enable> enables and disables macro usage. When enable is zero, macros
usage is disabled. Any non-zero value enables macro usage.
The query form returns 1 if macro usage is enabled, 0 if disabled.
Comments •Macro definitions are not affected by this command.
•Executable when initiated: Yes
•Coupling group: none
•*RST Condition: macro usage is disa bled
•Power-On Condition: macro usage is enabled
*ESE and *ESE?*ESE <mask> enables one or more event bits of the Standard Event Status Regist er
to be reported in bit 5 (the Standard Event Status Summa r y Bi t) of the St a tus Byte
Register. Mask is the sum of the decimal weights of the bits to be enabled.
The query form returns the current enable mask.
Parameters Parameter
Name Parameter
Type Range of
Values Default
Units
mask numeric 0 through 255 none
A 1 in a bit position enables the corresponding event; a 0 disabl es it.
Comments •Executable when initiated: Yes
•Coupling group: none
•Related Commands: *ESR?, *SRE, *STB?
•*RST Condition: unaffected
*EMC and *EMC?