*PMC
*PMC purges all macro definitions.
Comments •Use the *RMC command to purge an single macro definition.
•Executable when initiated: Yes
•Coupling group: none
•Related commands: *DMC, *RMC
•*RST Condition: none
*RCL*RCL <number> restores a previously stored programming state from one of the 10
possible stored state areas. Number i ndicates which of the stored state areas should
be used.
Parameters Parameter
Name Parameter
Type Range of
Values Default
Units
number numeric 0 through 9 none
Comments •Executable when initiated: No
•Coupling group: none
•Related Commands: *LRN?, *RST, *SA V
•*RST Condition: unaffected
• Power-on Condition: all saved states set to the same state as the * RST state
*RMC*RMC <name> purges only the specified macro definit ion.
NOTE: At printing time, *RMC is a command proposed and accept ed for a revision
and re-designation of IEEE-488.2.
Comments •Use the *PMC command to purge all macro definitions i n one co mmand.
•Executable when initiated: Yes
•Coupling group: none
*PMC