*CLS*CLS clears the Standard Event Status Register, the Operation Status Register, the
Questionable Signal Register, and the error queue. Thi s cle ars the corresponding
summary bits (3, 5, & 7) in the Status Byte Register. *CLS does not a f fec t t he
enable masks of any of the status registers .
Comments •Executable when initiated: Yes
•Coupling group: none
•Related Commands: STATus:PRESet
•*RST Condition: none
*DMC*DMC <name>,<data> creates a macro with the specified name and assigns zero,
one, or a sequence of commands to the name. The sequence may be composed of
SCPI and/or Common Commands. The sequence must be sent in IEEE-488 .2
definite or indefinite block format.
Parameters Parameter
Name Parameter
Type Range of
Values Default
Units
name string
data 1 through 12 characters none
data block
data
or
string
any valid command
sequence none
Comments •Legal macro names must start with an alphabetic char a ct er and c ontain only
alphabetic, numeric, and underscore ("_") chara cters. Alphabetic character case
(upper vs. lower) is ignored.
The name is allowed to be the same as a SCPI command, but may be not be the
same as a Common Command. When the name is the same as a SCPI command,
the macro rather than the command will be executed when the name is received if
macro usage is enabled. The SCPI command will b e executed if macro usage is
disabled.
•Executable when initiated: Yes
•Coupling group: none
•Related Commands: *EMC, *GMC, *LMC, *RMC
*CLS