Agilent Technologies E1446A Instrument Driver Example Programs Disks, System Configuration

Instrument Driver

and Example

Programs Disks

System Configuration

The E1446A instrument driver and the example programs contained in this manual are located on the following disks:

•Agilent E1446A Instrument Driver and BASIC Example Programs - 3.5" 720 kbyte disk LIF Format (E1446-10031)

•Agilent E1446A Instrument Driver and BASIC Example Programs - 3.5" 1.44 Mbyte disk DOS Format (E1446-10032)

The example programs are SCPI programs written in BASIC. On the LIF formatted disk (E1446-10031), the programs are in LOAD / STORE (PROG) format. On the DOS formatted disk (E1446-10032), the programs are in GET / SAVE (ASCII) format.

Each program in this chapter is written in BASIC. Except where noted, the programs were developed on the following system:

Controller:	HP 9000 Series 300
Mainframe:	Agilent 75000 Series C
Slot 0/Resource Manager:	Agilent E1405B Command
	Module
E1445A Logical Address:	80
E1445A Servant Area:	8
E1446A Logical Address:	88
Instrument Language:	SCPI

2-4 Programming the Agilent E1446A Instrument and Programming Languages