16.2.2 Configuring RADIUS Server Settings
From the Port Authentication screen, click RADIUS to display the configuration screen as shown.
Figure 50 Port Authentication: RADIUS
The following table describes the labels in this screen.
Table 32 Port Authentication: RADIUS
LABEL | DESCRIPTION |
|
|
Authentication Server | |
|
|
IP Address | Enter the IP address of the external RADIUS server in dotted decimal notation. |
|
|
UDP Port | The default port of the RADIUS server for authentication is 1812. You need not |
| change this value unless your network administrator instructs you to do so. |
Shared Secret | Specify a password (up to 32 alphanumeric characters) as the key to be shared |
| between the external RADIUS server and the switch. This key is not sent over the |
| network. This key must be the same on the external RADIUS server and the switch. |
Apply | Click Apply to save your changes back to the switch. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
Chapter 16 Port Authentication | 99 |