ES-2108/ES-2108-G User’s Guide

Figure 126 name Command Example

ras(config)# interface port-channel 1,3-5 ras(config-interface)# name Test

28.10.10 speed-duplex

Syntax:

speed-duplex <auto10-half10-full100-half100-full1000-full>

where

<auto10-half10- full100-half100- full1000-full>

Sets the duplex mode (half or full) and speed (10, 100 or 1000 Mbps) of the connection on the port. Selecting auto (auto-negotiation) makes one port able to negotiate with a peer automatically to obtain the connection speed and duplex mode that both ends support.

An example is shown next.

•Enable ports one, three, four and five for configuration.

•Set the speed to 10 Mbps in half duplex mode.

Figure 127 speed-duplex Command Example

ras(config)# interface port-channel 1,3-5 ras(config-interface)# speed-duplex 10-half

180

Chapter 28 Command Examples