ES-2108/ES-2108-G User’s Guide

Table 60 Command Summary: config-vlan Commands (continued)

 

 

 

 

 

COMMAND

 

DESCRIPTION

 

 

 

 

 

 

default-gateway

Sets a default gateway IP address for

 

 

<ip-address>

this VLAN.

 

 

default-

Sets the dynamic in-band IP address

 

 

management dhcp-

 

 

 

bootp

 

 

 

default-

Sets a static in-band IP address and

 

 

management <ip-

subnet mask.

 

 

address> <mask>

 

 

 

default-

Releases the dynamic in-band IP

 

 

management dhcp-

address.

 

 

bootp release

 

 

 

default-

Updates the dynamic in-band IP

 

 

management dhcp-

address.

 

 

bootp renew

 

 

name <name-str>

 

Specifies a name for identification

 

 

 

purposes.

 

no

fixed <port-list>

Sets fixed port(s) to normal port(s).

 

 

forbidden <port-

Sets forbidden port(s) to normal

 

 

list>

port(s).

 

 

inactive

Enables the specified VLAN.

 

 

ip address <ip-

Deletes the IP address and subnet

 

 

address> <mask>

mask from this VLAN.

 

 

ip address

Deletes the default gateway from this

 

 

default-gateway

VLAN.

 

 

ip address

Sets the default in-band interface to

 

 

default-

use a static IP address in this VLAN.

 

 

management dhcp-

The switch will use the default IP

 

 

bootp

address of 0.0.0.0 if you do not

 

 

 

configure a static IP address.

 

 

untagged <port-

Enables VLAN tagging for outgoing

 

 

list>

traffic on the specified port(s).

 

normal <port-

 

Specifies the port(s) to dynamically

 

list>

 

join this VLAN group using GVRP

 

untagged <port-

 

Specifies the port(s) you don’t want to

 

list>

 

tag all outgoing frames transmitted

 

 

 

with this VLAN Group ID.

Chapter 27 Introducing the Commands

163