8.5.3 Configure VLAN Port Settings
To configure the VLAN settings on a port, click the VLAN Port Setting link in the VLAN Status screen.
Figure 35 VLAN: VLAN Port Setting
The following table describes the labels in this screen.
Table 16 VLAN: VLAN Port Setting
LABEL | DESCRIPTION |
|
|
GVRP | GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a |
| way for switches to register necessary VLAN members on ports across the |
| network. |
| Select this check box to permit VLAN groups beyond the local switch. |
|
|
Port Isolation | Port Isolation isolates ports on the same VLAN (802.1q). ‘This option is the most |
| limiting but also the most secure. |
Ingress Check | Select this check box to activate ingress filtering on the switch. |
| Clear this check box to disable ingress filtering the switch. |
|
|
Port | This field displays the port number. |
|
|
PVID | Enter a number between 1and 4094 as the port VLAN ID. |
|
|
GVRP | Select this check box to allow GVRP on this port. |
|
|
Acceptable Frame | Specify the type of frames allowed on a port. Choices are All and Tag Only. |
Type | Select All from the |
| this port. This is the default setting. |
| Select Tag Only to accept only tagged frames on this port. All untagged frames will |
| be dropped. |
VLAN Trunking | Enable VLAN Trunking on ports connected to other switches or routers (but not |
| ports directly connected to end users) to allow frames belonging to unknown VLAN |
| groups to pass through the switch. |
Chapter 8 VLAN | 73 |