ES-2108/ES-2108-G User’s Guide

Figure 122 gvrp Command Example

ras(config)# vlan1q gvrp

ras(config)# interface port-channel 1,3-5 ras(config-interface)# gvrp

28.10.6 frame-type

Syntax:

frame-type <alltagged>

where

<alltagged> Choose to accept both tagged and untagged incoming frames or just tagged incoming frames on a port.

An example is shown next.

•Enable ports one, three, four and five for configuration.

•Enable tagged frame-types on the interface.

Figure 123 frame-type Command Example

ras(config-vlan1q)# ingress-check ras(config)# interface port-channel 1,3-5 ras(config-interface)# frame-type tagged

28.10.7 egress set

Syntax:

egress set <port-list>

where

<port-list>

Sets the outgoing traffic port list for a port-based VLAN.

An example is shown next.

•Enable port-based VLAN tagging on the switch.

•Enable ports one, three, four and five for configuration.

•Set the outgoing traffic ports as the CPU (0), seven (7), eight (8) and nine (9).

178

Chapter 28 Command Examples