Table 11 IP Setup (continued)
LABEL | DESCRIPTION |
|
|
VID | Enter the VLAN identification number associated with the switch IP address. This is the |
| VLAN ID of the CPU and is used for management only. The default is "1". All ports, by |
| default, are fixed members of this "management VLAN" in order to manage the device |
| from any port. If a port is not a member of this VLAN, then users on that port cannot |
| access the device. To access the switch make sure the port that you are connected to is |
| a member of Management VLAN. |
Apply | Click Apply to save the settings. |
|
|
Cancel | Click Cancel to reset the fields to your previous configuration. |
|
|
Management | Configure the fields to set additional management IP address. |
IP Addresses |
|
IP Address | Enter the IP address for managing the switch by the members of the VLAN specified in |
| the VID field below. |
IP Subnet | Enter the IP subnet mask in dotted decimal notation. For example, 255.255.255.0. |
Mask |
|
VID | Enter the VLAN identification number. |
|
|
Add | Click Add to save the new rule to the switch. It then displays in the summary table at the |
| bottom of the screen. |
Cancel | Click Cancel to reset the fields to your previous configuration. |
|
|
Index | This field displays the index number of an entry. |
|
|
IP Address | This field displays the management IP address of the switch. |
|
|
Subnet Mask | This field displays the subnet mask of the switch. |
|
|
VID | This field displays the VLAN identification number of the network. |
|
|
Delete | Click Delete to remove the selected entry from the summary table. |
|
|
Cancel | Click Cancel to clear the Delete check boxes. |
|
|
7.8 Port Setup
Click Basic Setting and then Port Setup in the navigation panel to enter the port configuration screen.
64 | Chapter 7 Basic Setting |