CHAPTER 21
Maintenance
This chapter explains how to configure the maintenance screens that let you maintain the firmware and configuration files.
21.1 The Maintenance Screen
Click Management, Maintenance in the navigation panel to open the following screen.
Figure 58 Maintenance
The following table describes the labels in this screen.
Table 40 Maintenance
LABEL | DESCRIPTION |
|
|
Firmware | Access this screen to upload a new firmware. |
Upgrade |
|
Restore | Access this screen to upload a previously saved configuration file to the switch. |
Configuration |
|
Backup | Access this screen to back up the current switch configuration. |
Configuration |
|
Load Factory | Click the button to clear all switch configuration information you configured and |
Default | return to the factory defaults. |
| Note: All custom configuration will be lost. |
| This takes up to two minutes (or wait until the switch finishes |
| rebooting). If you want to access the switch web configurator |
| again, you may need to change the IP address of your |
| computer to be in the same subnet as that of the default |
| switch IP address (192.168.1.1). |
|
|
Reboot System | Click the button to restart the switch without physically turning the power off. |
| Note: This takes up to two minutes (or wait until the switch finishes |
| rebooting). This does not affect the switch's configuration. |
Chapter 21 Maintenance | 111 |