Figure 34 VLAN: Static VLAN
The following table describes the related labels in this screen.
Table 15 VLAN: Static VLAN
LABEL | DESCRIPTION |
|
|
ACTIVE | Select this check box to activate the VLAN settings. |
|
|
Name | Enter a descriptive name for the VLAN group for identification purposes. |
|
|
VLAN Group ID | Enter the VLAN ID for this static entry; the valid range is between 1 and 4094. |
|
|
Port | The port number identifies the port you are configuring. |
|
|
Control | Select Normal for the port to dynamically join this VLAN group using GVRP. This is |
| the default selection. |
| Select Fixed for the port to be a permanent member of this VLAN group. |
| Select Forbidden if you want to prohibit the port from joining this VLAN group. |
|
|
Tagging | Select TX Tagging if you want the port to tag all outgoing frames transmitted with |
| this VLAN Group ID. |
Add | Click Add to add the settings as a new entry in the summary table below. |
|
|
Cancel | Click Cancel to reset the fields. |
Clear | Click Clear to start configuring the screen again. |
|
|
VID | This field displays the ID number of the VLAN group. Click the number to edit the |
| VLAN settings. |
Active | This field indicates whether the VLAN settings are enabled (Yes) or disabled (No). |
|
|
Name | This field displays the descriptive name for this VLAN group. |
|
|
Delete | Click Delete to remove the selected entry from the summary table. |
Cancel | Click Cancel to clear the Delete check boxes. |
|
|
72 | Chapter 8 VLAN |