ZyXEL Communications ES-2108, ES-2108-G manual 160

		ES-2108/ES-2108-G User’s Guide
Table 58 Command Summary: Configuration Mode (continued)
COMMAND			DESCRIPTION
	get-community		Sets the get community.
	<property>
	set-community		Sets the set community.
	<property>
	trap-community		Sets the trap community.
	<property>
	trap-destination		Sets the IP addresses of up to
	<ip>		four stations to send your
			SNMP traps to.
spanning-tree			Enables STP on the switch.
	<port-list>		Enables STP on a specified
			port.
	<port-list> path-		Sets the STP path cost for a
	cost <1-65535>		specified port.
	<port-list>		Sets the priority for a specified
	priority <0-255>		port.
	hello-time <1-10>		Sets Hello Time, Maximum Age
	maximum-age <6-40>		and Forward Delay.
	forward-delay <4-
	30>
	help		Displays help information.
	priority <0-61440>		Sets the bridge priority of the
			switch.
spq			Sets the switch to use Strictly
			Priority Queuing (SPQ).
ssh	known-hosts <host-		Adds a remote host to which the
	ip> <1024ssh-		switch can access using SSH
	rsassh-dsa> <key>		service.
storm-control			Enables broadcast storm
			control on the switch.
time	<Hour:Min:Sec>		Sets the time in hour, minute
			and second format.
	date <month/day/		Sets the date in year, month
	year>		and day format.
	help		Displays help information.
	timezone <-		Selects the time difference
	1200...1200>		between UTC (formerly known
			as GMT) and your time zone.
timesync	<daytimetimentp>		Sets the time server protocol.
	server <ip>		Sets the IP address of your time
			server.
trunk	<T1T2>		Activates a trunk group.
	<T1T2>interface		Adds a port(s) to the specified
	<port-list>		trunk group.

Chapter 27 Introducing the Commands 159