ZyXEL Communications ES-2108, ES-2108-G 27.9.4 interface port-channelCommands

ES-2108/ES-2108-G User’s Guide

Table 58 Command Summary: Configuration Mode (continued)

COMMAND			DESCRIPTION
	<T1T2>lacp		Enables LACP for a trunk
			group.
	interface <port-		Defines the port number and
	list> timeout		LACP timeout period.
	<lacp-timeout>
vlan	<1-4094>		Enters the VLAN configuration
			mode. See Section 27.9.5 on
			page 162 for more information.
vlan-type	<802.1qport-based>		Specifies the VLAN type.
vlan1q	gvrp		Enables GVRP.
	ingress-check		Enables VLAN tag checking on
			incoming traffic.
	port-isolation		Enables port-isolation.
wrr			Sets the switch to use Weighted
			Round Robin queuing (WRR).
		<wt1 .. wt4>	Sets the WRR weight. A weight
			value of one to eight is given to
			each variable from wt1 to wt4.

27.9.4 interface port-channel Commands

The following table lists the interface port-channelcommands in configuration mode. Use these commands to configure the ports.

Table 59 interface port-channel Commands

COMMAND			DESCRIPTION
interface			Enables a port or a list of ports
port-channel			for configuration.
<port-list>
	bandwidth-limit		Enables bandwidth control on
			the port(s).
		egress <kbps>	Sets the maximum bandwidth
			allowed for outgoing traffic on
			the port(s).
		ingress <kbps>	Sets the maximum bandwidth
			allowed for incoming traffic on
			the port(s).
	bmstorm-limit		Enables broadcast storm
			control on the port.
		<Kbps>	Sets the limit of broadcast storm
			packets in kilobit per second
			(Kbps).
	diffserv		Enables DiffServ on the port(s).

160 Chapter 27 Introducing the Commands