ES-2108/ES-2108-G User’s Guide

Table 58 Command Summary: Configuration Mode (continued)

 

 

 

 

 

COMMAND

 

DESCRIPTION

 

 

 

 

 

 

https

Disables secure web browser

 

 

 

access to the switch.

 

 

icmp

Disables ICMP access to the

 

 

 

switch such as pinging and

 

 

 

tracerouting.

 

 

snmp

Disables SNMP management.

 

 

ssh

Disables SSH (Secure Shell)

 

 

 

server access to the switch.

 

 

telnet

Disables telnet access to the

 

 

 

switch.

 

snmp-server

trap-destination

Disables sending of SNMP

 

 

<ip>

traps to a station.

 

spanning-tree

 

Disables STP.

 

 

<port-list>

Disables STP on listed ports.

 

ssh

key <rsa1rsadsa>

Disables the secure shell server

 

 

 

encryption key. Your switch

 

 

 

supports SSH versions 1 and 2

 

 

 

using RSA and DSA

 

 

 

authentication.

 

 

known-hosts

Removes all remote hosts.

 

 

known-hosts <host-

Removes the specified remote

 

 

ip>

hosts from the list of all known

 

 

 

hosts.

 

 

known-hosts <host-

Removes remote known hosts

 

 

ip> [1024ssh-

with the specified public key

 

 

rsassh-dsa]

(1024-bit RSA1, RSA or DSA).

 

 

 

 

storm-control

 

Disables broadcast storm

 

 

 

control.

 

timesync

 

Disables timeserver settings.

 

trunk

<T1T2>

Disables the specified trunk

 

 

 

group.

 

 

<T1T2> interface

Removes ports from the

 

 

<port-list>

specified trunk group.

 

 

<T1T2> lacp

Disables LACP in the specified

 

 

 

trunk group.

 

vlan

<vlan-id>

Deletes the static VLAN entry.

 

vlan1q

gvrp

Disables GVRP on the switch.

 

 

ingress-check

Disables VLAN tag checking on

 

 

 

incoming traffic.

 

 

port-isolation

Disables port isolation.

password

 

 

Change the password for

 

 

 

Enable mode.

port-access-

 

 

Enables 802.1x authentication

authenticator

 

 

on the switch.

Chapter 27 Introducing the Commands

157