ZyXEL Communications ES-2108, ES-2108-G 28.7.4 no port-access-authenticator, 28.7.5 no ssh

ES-2108/ES-2108-G User’s Guide

Figure 113 no trunk Command Example

ras(config)# no trunk T1

ras(config)# no trunk T2 interface 1,3-5

28.7.4 no port-access-authenticator

Syntax:

no port-access-authenticator

no port-access-authenticator <port-list> reauthenticate no port-access-authenticator <port-list>

where
	= Disables port authentication on the switch.
<port-list>	= Disables the re-authentication mechanism on the listed port(s).
reauthenticate
<port-list>	= Disables authentication on the listed ports.

An example is shown next.

•Disable authentication on the switch.

•Disable re-authentication on ports one, three, four and five.

•Disable authentication on ports one, six and seven.

Figure 114 no port-access-authenticator Command Example

ras(config)# no port-access-authenticator

ras(config)# no port-access-authenticator 1,3-5 reauthenticate ras(config)# no port-access-authenticator 1,6-7

28.7.5 no ssh

Syntax:

no ssh		key <rsa1rsadsa>
no	ssh	known-hosts	<host-ip>
no	ssh	known-hosts	<host-ip> [1024ssh-rsassh-dsa]

where
key <rsa1rsadsa>	Disables the secure shell server encryption key. Your switch
	supports SSH versions 1 and 2 using RSA and DSA
	authentication.

Chapter 28 Command Examples 173