ES-2108/ES-2108-G User’s Guide

Figure 69 Access Control: SNMP

The following table describes the labels in this screen.

Table 45 Access Control: SNMP

LABEL

DESCRIPTION

 

 

Get Community

Enter the get community, which is the password for the incoming Get- and GetNext-

 

requests from the management station.

Set Community

Enter the set community, which is the password for incoming Set- requests from the

 

management station.

Trap Community

Enter the trap community, which is the password sent with each trap to the SNMP

 

manager.

Trap Destination

Enter the IP addresses of up to four stations to send your SNMP traps to.

 

 

Apply

Click Apply to save your changes back to the switch.

 

 

Cancel

Click Cancel to begin configuring this screen afresh.

22.4 Setting Up Login Accounts

Up to five people (one administrator and four non-administrators) may access the switch via web configurator at any one time.

•An administrator is someone who can both view and configure switch changes. The username for the Administrator is always admin. The default administrator password is 1234.

Note: It is highly recommended that you change the default administrator password (1234).

•A non-administrator (username is something other than admin) is someone who can view but not configure switch settings.

Click Access Control from the navigation panel and then click Logins from this screen.

120

Chapter 22 Access Control