CHAPTER 10
Filtering
This chapter discusses static IP and MAC address port filtering.
10.1 Overview
Port filtering means discarding (or dropping) packets based on the MAC addresses and VLAN group.
10.2 Configure a Filtering Rule
Click Advanced Application and Filtering in the navigation panel to display the screen as shown next.
Figure 39 FilteringThe following table describes the related labels in this screen.
Table 19 | FIltering | |
|
|
|
LABEL |
| DESCRIPTION |
|
|
|
Active |
| Make sure to select this check box to activate your rule. You may temporarily deactivate |
|
| a rule without deleting it by deselecting this check box. |
Name |
| Type a descriptive name (up to 32 printable ASCII characters) for this rule. This is for |
|
| identification purpose only. |
MAC |
| Type a MAC address in valid MAC address format, that is, six hexadecimal character |
|
| pairs. |
VID |
| Type the VLAN group identification number. |
|
|
|
Chapter 10 Filtering | 79 |