Chapter 15 Network Address Translation (NAT)
NBG-419N User’s Guide 147
15.5 NAT Advanced Screen
Some services use a dedicated range of ports on the client side and a dedicated
range of ports on the server side. With regular port forwarding you set a
forwarding port in NAT to forward a service (coming in from the server on the
WAN) to the IP address of a computer on the client side (LAN). The problem is
that port forwarding only forwards a service to a s ingle LAN IP a ddress . In ord er to
use the same service on a different LAN computer, you have to manually replace
the LAN computer's IP address in the forwarding port with another LAN
computer's IP address.
Trigger port forwarding solves this problem by allowing computers on the LAN to
dynamically take turns using the service. The NBG-419N records the IP address of
a LAN computer that sends traffic to the WAN to request a service with a specific
port number and protocol (a "trigger" port). When the NBG-419N's WAN port
receives a response with a specific port number and protocol ("incoming" port),
the NBG-419N forwards the traffic to the LAN IP address of the computer that sent
the request. After that computer’s connection for that service closes, another
computer on the LAN can use the service in the same manner. This way you do
not need to configure a new IP address each time you want a different LAN
computer to use the application.
To change your NBG-419N’s trigger port settings, click Network > NAT >
Advanced. The screen appears as shown.
Server IP
Address
This field displays the inside IP address of the server.
Modify Click the Edit icon to display and modify an existing rule setting in the
fields under Add Application Rule.
Click the Remove icon to delete a rule.
Apply Click Apply to save your changes back to the NBG-419N.
Reset Click Reset to begin configuring this screen afresh.

Table 58 Network > NAT > Application (continued)

LABEL DESCRIPTION