Chapter 7 Router Mode
NBG-419N User’s Guide
66
- 802.11 Mode This shows the wireless standard.
- WPS This displays Configured when the WPS has been set up.
This displays Unconfigured if the WPS has not been set up.
Click the status to display Network > Wireless LAN > WPS screen.
System Status
Item This column shows the type of data the NBG-419N is recording.
Data This column shows the actual data recorded by the NBG-419N.
System Up Time This is the total time the NBG-419N has been on.
Current Date/Time This field displays your NBG-419N’s present date and time.
System Resource
- CPU Usage This displays what percentage of the NBG-419N’s processing ability is
currently used. When this percentage is close to 100%, the NBG-419N is
running at full load, and the throughput is not going to improve anymore.
If you want some applications to have more throughput, you should turn
off other applications (for example, using bandwidth management.)
- Memory Usage This shows what percentage of the heap memory the NBG-419N is using.
System Setting
- Firewall This shows whether the firewall is enabled or not.
- Bandwidth
Management This shows whether the bandwidth management is enabled or not.
- UPnP This shows whether UPnP is enabled or not.
- Configuration Mode This shows the web configurator mode you are viewing - Expert.
Interface Status
Interface This displays the NBG-419N port types. The port types are: WAN, LAN
and WLAN.
Status For the LAN and WAN ports, this field displays Down (line is down) or Up
(line is up or connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when
the WLAN is disabled.
Rate For the LAN ports, this displays the port speed and duplex setting or N/A
when the line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you’re
using Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to
trigger a call) and Drop (dropping a call) if you're using PPPoE or PPTP
encapsulation. This field displays N/A when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN
is enabled and N/A when the WLAN is disabled.
Summary
BW MGMT Monitor Click Details... to go to the Monitor > BW MGMT Monitor screen
(Section 4.3 on page 43). Use this screen to view the amount of
network bandwidth that applications running in the network are using.
Table 25 Status Screen: Router Mode
LABEL DESCRIPTION