Chapter 14 DHCP Server
NBG-419N User’s Guide
140
The following table describes the labels in this screen.
14.4 Advanced Screen
This screen allows you to assign IP addresses on the LAN to specific individual
computers based on their MAC addresses. You can also use this screen to
configure the DNS server information that the NBG-419N sends to the DHCP
clients.
To change your NBG-419N’s static DHCP settings, click Network > DHCP Server
> Advanced. The following screen displays.

Figure 91 Network > DHCP Server > Advanced

Table 55 Network > DHCP Server > General

LABEL DESCRIPTION
Enable DHCP
Server
Enable or Disable DHCP for LAN.
IP Pool Starting
Address
This field specifies the first of the contiguous addresses in the IP
address pool for LAN.
Pool Size This field specifies the size, or count of the IP address pool for LAN.
Apply Click Apply to save your changes back to the NBG-419N.
Reset Click Reset to begin configuring this screen afresh.