Chapter 8 Access Point Mode
NBG-419N User’s Guide
72
8.3 What You Need to Know
See Chapter 10 on page 89 for a tutorial on setting up a network with the NBG-
419N as an access point.

8.3.1 Setting your NBG-419N to AP Mode

1Log into the Web Configurator if you haven’t already. See the Quick start Guide for
instructions on how to do this.
2To use your NBG-419N as an access point, go to Maintenance > Sys OP Mode
> General and select Access Point mode.
Figure 43 Changing to Access Point mode
Note: You have to log in to the Web Configurator again when you change modes.As
soon as you do, your NBG-419N is already in Access Point mode.
3When you select Access Point Mode, the following pop-up message window
appears.
Figure 44 Pop up for Access Point mode
Click OK. The Web Configurator refreshes once the change to Access Point mode
is successful.