Chapter 11 Wireless LAN
NBG-419N User’s Guide
116
Click Network > Wireless LAN > WDS tab. The following screen opens with the
Basic Setting set to Disabled, and Security Mode set to No Security.
Figure 77 Network > Wireless LAN > WDS
The following table describes the labels in this screen.
Table 46 Network > Wireless LAN > WDS
LABEL DESCRIPTION
WDS Setup
Basic Settings Select the operating mode for your NBG-419N.
AP + Bridge - The NBG-419N functions as a bridge and access point
simultaneously.
Bridge - The NBG-419N acts as a wireless network bridge and
establishes wireless links with other APs. You need to know the MAC
address of the peer device, which also must be in bridge mode. The
NBG-419N can establish up to five wireless links with other APs.
Local MAC
Address
This is the MAC address of your NBG-419N.
Phy Mode Select the Phy mode you want the NBG-419N to use. This dictates the
maximum size of packets during data transmission.
Remote MAC
Address
This is the MAC address of the peer device that your NBG-419N wants
to make a bridge connection with.
You can connect to up to 4 peer devices.
Security
EncrypType Select whether to use WEP, TKIP or AES encryption for your WDS
connection in this field.
Otherwise, select No Security.
EncrypKey The Encryp key is used to encrypt data. Peers must use the same key
for data transmission.