Chapter 11 Wireless LAN
NBG-419N User’s Guide
110
11.6 Wireless LAN Advanced Screen
Use this screen to allow wireless advanced features, such as intra-BSS networking
and set the RTS/CTS Threshold
Click Network > Wireless LAN > Advanced. The screen appears as shown.

Figure 72 Network > Wireless LAN > Advanced

The following table describes the labels in this screen.

Table 41 Network > Wireless LAN > Advanced

LABEL DESCRIPTION
RTS/CTS
Threshold
Data with its frame size larger than this value will perform the RTS
(Request To Send)/CTS (Clear To Send) handshake.
Enter a value between 256 and 2432.
Fragmentatio
n Threshold
The threshold (number of bytes) for the fragmentation boundary for
directed messages. It is the maximum data fragment size that can be
sent. Enter an even number between 256 and 2346.
Enable Intra-
BSS Traffic
A Basic Service Set (BSS) exists when all communications between
wireless clients or between a wireless client and a wired network client go
through one access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-
BSS is enabled, wireless client A and B can access the wired network and
communicate with each other. When Intra-BSS is disabled, wireless client
A and B can still access the wired network but cannot communicate with
each other.
Output Power Set the output power of the NBG-419N in this field. If there is a high
density of APs in an area, decrease the output power of the NBG-419N to
reduce interference with other APs. Select one of the following 100%,
90%, 75%, 50%, 25%, 10% or Minimum. See the product
specifications for more information on your NBG-419N’s output power.
HT (High Throughput) Physical Mode - Use the fields below to configure the 802.11
wireless environment of your NBG-419N.