NBG-419N User’s Guide 217
CHAPTER 31

Troubleshooting

This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories.
Power, Hardware Connections, and LEDs
NBG-419N Access and Login
Internet Access
Resetting the NBG-419N to Its Factory Defaults
Wireless Router/AP Troubleshooting

31.1 Power, Hardware Connections, and LEDs

The NBG-419N does not turn on. None of the LEDs turn on.
1Make sure you are using the power adaptor or cord included with the NBG-419N.
2Make sure the power adaptor or cord is connected to the NBG-419N and plugged
in to an appropriate power source. Make sure the power source is turned on.
3Disconnect and re-connect the power adaptor or cord to the NBG-419N.
4If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1Make sure you understand the normal behavior of the LED. See Section 1.5 on
page 22.
2Check the hardware connections. See the Quick Start Guide.