Chapter 30 Sys OP Mode
NBG-419N User’s Guide 215

WISP

A WISP client connects to an existing access point wirelessly. It acts just like a
wireless client in notebooks/computers.

Figure 131 IP Address in Access Point Mode

30.4 Sys Op Mode Screen
Use this screen to select how you want to use your NBG-419N.

Figure 132 Maintenance > Sys OP Mode

The following table describes the labels in the General screen.

Table 78 Maintenance > Sys OP Mode

Access Point
Wireless
Client
LABEL DESCRIPTION
System Operation Mode
Router Select Router Mode if your device routes traffic between a local network
and another network such as the Internet. This mode offers services such
as a firewall or bandwidth management.
You can configure the IP address settings on your WAN port. Contact your
ISP or system administrator for more information on appropriate settings.