Chapter 32 Product Specifications
NBG-419N User’s Guide
228
32.1 Wall-mounting Instructions
Complete the following steps to hang your NBG-419N on a wall.
1Select a position free of obstructions on a sturdy wall.
2Drill two holes for the screws.

Be careful to avoid damaging pipes or cables located inside the

wall when drilling holes for the screws.

3Do not insert the screws all the way into the wall. Leave a small gap of about 0.5
cm between the heads of the screws and the wall.
4Make sure the screws are snugly fastened to the wall. They need to hold the
weight of the NBG-419N with the connection cables.
5Align the holes on the back of the NBG-419N with the screws on the wall. Hang
the NBG-419N on the screws.

Figure 133 Wall-mounting Example