Chapter 8 Access Point Mode
NBG-419N User’s Guide
74
8.4 AP Mode Status Screen
Click to open the Status screen.

Figure 45 Status Screen: Access Point Mode

The following table describes the labels shown in the Status screen.

Table 27 Status Screen: Access Point Mode

LABEL DESCRIPTION
Logout Click this at any time to exit the Web Configurator.
Device Information
Host Name This is the System Name you enter in the Maintenance > General
screen. It is for identification purposes.
Firmware Version This is the firmware version and the date created.
Sys OP Mode This is the device mode (Section 5.1.2 on page 49) to which the NBG-
419N is set - Access Point Mode.
LAN Information
- MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
- IP Address This shows the LAN port’s IP address.
- IP Subnet Mask This shows the LAN port’s subnet mask.
- DHCP This shows the LAN port’s DHCP role - Server, Client or None.