NBG-419N User’s Guide 71
CHAPTER 8

Access Point Mode

8.1 Overview

Use your NBG-419N as an access point (AP) if you already have a router or
gateway on your network. In this mode your NBG-419N bridges a wired network
(LAN) and wireless LAN (WLAN) in the same subnet. See the figure below for an
example.
Figure 42 Wireless Internet Access in Access Point Mode
Many screens that are available in Router mode are not available in Access Point
mode, such as bandwidth management and firewall.
Note: See Chapter 10 on page 89 for an example of setting up a wireless network in
Access Point mode.

8.2 What You Can Do

•Use the Status screen (Section 8.4 on page 74) to view read-only information
about your NBG-419N.
•Use the LAN screen (Section 8.5 on page 76) to set the IP address for your
NBG-419N acting as an access point.