Chapter 30 Sys OP Mode

NBG-419N User’s Guide
216
Note: If you select the incorrect System Operation Mode you may not be able to connect to the Internet.
Access Point Select Access Point Mode if your device bridges traffic between clients
on the same network.
In Access Point mode all Ethernet ports have the same IP address.
All ports on the rear panel of the device are LAN ports, including the
port labeled WAN. There is no WAN port.
The DHCP server on your device is disabled.
The IP address of the device on the local network is set to 192.168.1.2.
WISP Mode Select WISP Mode if your device needs a wireless client to connect to an
existing access point.
You cannot configure Wireless LAN settings (including WPS) and
scheduling in the WISP mode.
The IP address of the device on the local network is the same as the IP
address given to the NBG-419N while in router mode (default is
192.168.1.1).
Apply Click Apply to save your settings.
Reset Click Reset to return your settings to the default (Router)
LABEL DESCRIPTION