NBG-419N User’s Guide 157
CHAPTER 18

RIP

18.1 Overview

Routing Information Protocol (RIP) is an interior or intra-domain routing protocol
that uses distance-vector routing algorithms. RIP is used on the Internet and is
common in the NetWare environment as a method for exchanging routing
information between routers.

18.2 What You Can Do

Use the RIP screen (Section 18.3 on page 157) to enable RIPv1 or RIPv2, which are
LAN broadcast protocols.

18.3 RIP Screen

Use this screen to enable RIPv1 or RIPv2, which are LAN broadcast protocols. Click
Network > RIP. The screen appears as shown.
Figure 100 Network > RIP