NBG-419N User’s Guide 153
CHAPTER 17

Static Route

17.1 Overview

This chapter shows you how to configure static routes for your NBG-419N.
Each remote node specifies only the network to which the gateway is directly
connected, and the NBG-419N has no knowledge of the networks beyond. For
instance, the NBG-419N knows about network N2 in the following figure through
remote node Router 1. However, the NBG-419N is unable to route a packet to
network N3 because it doesn't know that there is a route through the same
remote node Router 1 (via gateway Router 2). The static routes are for you to tell
the NBG-419N about the networks beyond the remote nodes.
Figure 98 Example of Static Routing Topology

17.2 What You Can Do

Use the IP Static Route screen (Section 17.3 on page 154) to view, add and
delete routes.