Chapter 7 WAN Setup
Figure 67 Internet Connection (PPPoE)
The following table describes the labels in this screen.
Table 33 Internet Connection
LABEL | DESCRIPTION |
General |
|
|
|
Name | Enter the name of your Internet Service Provider, e.g., MyISP. This information |
| is for identification purposes only. |
|
|
Mode | Select Routing (default) from the |
| computers to share an Internet account. Otherwise select Bridge. |
Encapsulation | Select the method of encapsulation used by your ISP from the |
| box. Choices vary depending on the mode you select in the Mode field. |
| If you select Bridge in the Mode field, select either PPPoA or RFC 1483. |
| If you select Routing in the Mode field, select PPPoA, RFC 1483, ENET |
| ENCAP or PPPoE. |
User Name | (PPPoA and PPPoE encapsulation only) Enter the user name exactly as your |
| ISP assigned. If assigned a name in the form user@domain where domain |
| identifies a service name, then enter both components exactly as given. |
|
|
Password | (PPPoA and PPPoE encapsulation only) Enter the password associated with the |
| user name above. |
|
|
Service Name | (PPPoE only) Type the name of your PPPoE service here. |
|
|
Multiplexing | Select the method of multiplexing used by your ISP from the |
| Choices are VC or LLC. |
|
|
| 103 |
|
|