Chapter 20 Logs

Table 106 ICMP Logs

 

LOG MESSAGE

DESCRIPTION

Firewall default policy: ICMP

ICMP access matched the default policy and was

<Packet Direction>, <type:%d>,

blocked or forwarded according to the user's setting. For

<code:%d>

type and code details, see Table 118 on page 268.

Firewall rule [NOT] match: ICMP

ICMP access matched (or didn’t match) a firewall rule

<Packet Direction>, <rule:%d>,

(denoted by its number) and was blocked or forwarded

<type:%d>, <code:%d>

according to the rule. For type and code details, see

 

Table 118 on page 268.

Triangle route packet forwarded:

The firewall allowed a triangle route session to pass

ICMP

through.

Packet without a NAT table entry

The router blocked a packet that didn’t have a

blocked: ICMP

corresponding NAT table entry.

Unsupported/out-of-order ICMP:

The firewall does not support this kind of ICMP packets

ICMP

or the ICMP packets are out of order.

Router reply ICMP packet: ICMP

The router sent an ICMP reply packet to the sender.

Table 107 CDR Logs

LOG MESSAGE

DESCRIPTION

board%d line%d channel%d,

The router received the setup requirements for a call. “call” is

call%d,%s C01 Outgoing Call

the reference (count) number of the call. “dev” is the device

dev=%x ch=%x%s

type (3 is for dial-up, 6 is for PPPoE, 10 is for PPTP).

 

"channel" or “ch” is the call channel ID.For example,"board 0

 

line 0 channel 0, call 3, C01 Outgoing Call dev=6 ch=0

 

"Means the router has dialed to the PPPoE server 3 times.

 

 

board%d line%d channel%d,

The PPPoE, PPTP or dial-up call is connected.

call%d,%s C02 OutCall

 

Connected%d%s

 

board%d line%d channel%d,

The PPPoE, PPTP or dial-up call was disconnected.

call%d,%s C02 Call

 

Terminated

 

Table 108 PPP Logs

LOG MESSAGE

DESCRIPTION

ppp:LCP Starting

The PPP connection’s Link Control Protocol stage has started.

ppp:LCP Opening

The PPP connection’s Link Control Protocol stage is opening.

ppp:CHAP Opening

The PPP connection’s Challenge Handshake Authentication Protocol stage is

 

opening.

ppp:IPCP

The PPP connection’s Internet Protocol Control Protocol stage is starting.

Starting

 

ppp:IPCP Opening

The PPP connection’s Internet Protocol Control Protocol stage is opening.

ppp:LCP Closing

The PPP connection’s Link Control Protocol stage is closing.

ppp:IPCP Closing

The PPP connection’s Internet Protocol Control Protocol stage is closing.

260

 

P-660HW-Tx v3 User’s Guide