Chapter 23 Troubleshooting

2Restart the ZyXEL Device.

3If the problem continues, contact your ISP.

23.4Reset the ZyXEL Device to Its Factory Defaults

If you reset the ZyXEL Device, you lose all of the changes you have made. The ZyXEL Device re-loads its default settings, and the password resets to 1234. You have to make all of your changes again.

You will lose all of your changes when you push the RESET button.

To reset the ZyXEL Device,

1Make sure the POWER LED is on and not blinking.

2Press and hold the RESET button for five to ten seconds. Release the RESET button when the POWER LED begins to blink. The default settings have been restored.

If the ZyXEL Device restarts automatically, wait for the ZyXEL Device to finish restarting, and log in to the web configurator. The admin password is “1234”.

If the ZyXEL Device does not restart automatically, disconnect and reconnect the ZyXEL Device’s power. Then, follow the directions above again.

284

 

P-660HW-Tx v3 User’s Guide