Chapter 9 Wireless LAN
Table 52 Network > Wireless LAN > WPS
LABEL | DESCRIPTION |
Release_Con | This button is available when the WPS status is Configured. |
figuration | Click this button to remove all configured wireless and wireless security settings for |
| WPS connections on the ZyXEL Device. |
|
|
Apply | Click this to save your changes. |
|
|
Refresh | Click this to update the screen. |
|
|
9.6 The WPS Station Screen
Use this screen to set up a WPS wireless network using either Push Button Configuration (PBC) or PIN Configuration.
Click Network > Wireless LAN > WPS Station. The following screen displays.
Figure 97 Network > Wireless LAN > WPS Station
The following table describes the labels in this screen.
Table 53 Network > Wireless LAN > WPS Station
LABEL | DESCRIPTION |
Push Button | Click this to add another |
| the ZyXEL Device) to your wireless network. This button may either be a physical |
| button on the outside of device, or a menu button similar to the Push Button on |
| this screen. |
| Note: You must press the other wireless device’s WPS button within |
| two minutes of pressing this button. |
|
|
Or input station's | Enter the PIN of the device that you are setting up a WPS connection with and click |
PIN number | Start to authenticate and add the wireless device to your wireless network. |
| You can find the PIN either on the outside of the device, or by checking the |
| device’s settings. |
| Note: You must also activate WPS on that device within two |
| minutes to have it present its PIN to the ZyXEL Device. |
146 |
| |
| ||
|
|
|