Chapter 24 Product Specifications
3Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm between the heads of the screws and the wall.
4Make sure the screws are snugly fastened to the wall. They need to hold the weight of the ZyXEL Device with the connection cables.
5Align the holes on the back of the ZyXEL Device with the screws on the wall. Hang the ZyXEL Device on the screws.
Figure 176
24.2.1 M4 Tap Screw and Masonry Plug
The following are dimensions of an M4 tap screw and masonry plug used for wall mounting. All measurements are in millimeters (mm).
Figure 177 Masonry Plug and M4 Tap Screw
| 289 |
|
|