17
Remote Management
Configuration
This chapter provides information on configuring remote management.
17.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which ZyXEL Device interface (if any) from which computers.
"When you configure remote management to allow management from the WAN, you still need to configure a firewall rule to allow access.
You may manage your ZyXEL Device from a remote location via:
•Internet (WAN only)
•ALL (LAN and WAN)
•LAN only,
•Neither (Disable).
"When you choose WAN only or LAN & WAN, you still need to configure a firewall rule to allow access.
To disable remote management of a service, select Disable in the corresponding Access Status field.
You may only have one remote management session running at a time. The ZyXEL Device automatically disconnects a remote management session of lower priority when another remote management session of higher priority starts. The priorities for the different types of remote management sessions are as follows.
1Telnet
2HTTP
| 221 |
|
|