ZyXEL Communications P-6600HW-Tx v3 manual 212

Chapter 15 Bandwidth Management

Table 84 Bandwidth Management: Rule Setup (continued)

LABEL	DESCRIPTION
Modify	Click the Edit icon to go to the screen where you can edit the rule.
	Click the Remove icon to delete an existing rule.
Apply	Click Apply to save your changes to the ZyXEL Device.
Cancel	Click Cancel to begin configuring this screen afresh.

15.9.1 Rule Configuration

Click the Edit icon or select User Defined from the Service drop-down list in the Rule Setup screen to configure a bandwidth management rule. Use bandwidth rules to allocate specific amounts of bandwidth capacity (bandwidth budgets) to specific applications and/or subnets.

Figure 133 Bandwidth Management Rule Configuration

The following table describes the labels in this screen.

Table 85 Bandwidth Management Rule Configuration

LABEL	DESCRIPTION
Rule Configuration
Active	Select this check box to have the ZyXEL Device apply this bandwidth
	management rule.
	Enable a bandwidth management rule to give traffic that matches the rule
	priority over traffic that does not match the rule.
	Enabling a bandwidth management rule also allows you to control the maximum
	amounts of bandwidth that can be used by traffic that matches the rule.
Rule Name	Use the auto-generated name or enter a descriptive name of up to 20
	alphanumeric characters, including spaces.

212
	P-660HW-Tx v3 User’s Guide