Chapter 8 LAN Setup
The following table describes the fields in this screen.
Table 39 LAN IP
LABEL | DESCRIPTION |
TCP/IP |
|
|
|
IP Address | Enter the IP address of your ZyXEL Device in dotted decimal notation, for |
| example, 192.168.1.1 (factory default). |
|
|
IP Subnet Mask | Type the subnet mask assigned to you by your ISP (if given). |
|
|
Apply | Click Apply to save your changes to the ZyXEL Device. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
Advanced Setup | Click this button to display the Advanced LAN Setup screen and edit more |
| details of your LAN setup. |
|
|
8.3.1 Configuring Advanced LAN Setup
To edit your ZyXEL Device's advanced LAN settings, click the Advanced Setup button in the LAN IP screen. The screen appears as shown.
Figure 78 Advanced LAN Setup
The following table describes the labels in this screen.
Table 40 Advanced LAN Setup
LABEL | DESCRIPTION |
RIP & Multicast |
|
Setup |
|
|
|
RIP Direction | Select the RIP direction from None, Both, In Only and Out Only. |
|
|
RIP Version | Select the RIP version from |
|
|
Multicast | IGMP (Internet Group Management Protocol) is a |
| establish membership in a multicast group. The ZyXEL Device supports both IGMP |
| version 1 |
|
|
| 121 |
|
|