Chapter 6 Bandwidth Management Wizard
2Click BANDWIDTH MANAGEMENT SETUP to configure the system for Internet access and wireless connection.
Figure 62 Wizard: Welcome
3Activate bandwidth management and select to allocate bandwidth to packets based on the service requirements.
Figure 63 Bandwidth Management Wizard: General Information
The following fields describe the label in this screen.
Table 31 Bandwidth Management Wizard: General Information
LABEL | DESCRIPTION |
Active | Select the Active check box to have the ZyXEL Device apply bandwidth |
| management to traffic going out through the ZyXEL Device’s port(s). |
| Select Services Setup to allocate bandwidth based on the service requirements. |
|
|
Back | Click Back to display the previous screen. |
|
|
Next | Click Next to proceed to the next screen. |
|
|
Exit | Click Exit to close the wizard screen without saving. |
|
|
4Use the second wizard screen to select the services that you want to apply bandwidth management and select the priorities that you want to apply to the services listed.
| 91 |
|
|