Chapter 7 WAN Setup

Table 36 More Connections Edit (continued)

LABEL

DESCRIPTION

Cancel

Click Cancel to begin configuring this screen afresh.

 

 

Advanced Setup

Click this button to display the More Connections Advanced screen and edit

 

more details of your WAN setup.

 

 

7.6.2 Configuring More Connections Advanced Setup

To edit your ZyXEL Device's advanced WAN settings, click the Advanced Setup button in the More Connections Edit screen. The screen appears as shown.

Figure 71 More Connections Advanced Setup

The following table describes the labels in this screen.

Table 37 More Connections Advanced Setup

LABEL

DESCRIPTION

RIP & Multicast

 

Setup

 

 

 

RIP Direction

Select the RIP direction from None, Both, In Only and Out Only.

 

 

RIP Version

Select the RIP version from RIP-1, RIP-2Band RIP-2M.

 

 

Multicast

IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to

 

establish membership in a multicast group. The ZyXEL Device supports both IGMP

 

version 1 (IGMP-v1) and IGMP-v2. Select None to disable it.

 

 

ATM QoS

 

 

 

ATM QoS Type

Select CBR (Continuous Bit Rate) to specify fixed (always-on) bandwidth for voice

 

or data traffic. Select UBR (Unspecified Bit Rate) for applications that are non-time

 

sensitive, such as e-mail. Select VBR-nRT(Variable Bit Rate-non Real Time) or

 

VBR-RT(Variable Bit Rate-Real Time) for bursty traffic and bandwidth sharing with

 

other applications.

 

 

Peak Cell Rate

Divide the DSL line rate (bps) by 424 (the size of an ATM cell) to find the Peak Cell

 

Rate (PCR). This is the maximum rate at which the sender can send cells. Type the

 

PCR here.

 

 

110

 

P-660HW-Tx v3 User’s Guide