Chapter 3 Wizard Setup for Internet Access
2Click INTERNET/WIRELESS SETUP to configure the system for Internet access and wireless connection.
Figure 19 Wizard: Welcome
3The wizard attempts to detect which WAN connection type you are using.
If the wizard detects your connection type and your ISP uses PPPoE or PPPoA, go to Section 3.2.1 on page 59. The screen varies depending on the connection type you use.
If the wizard does not detect a connection type and the following screen appears (see Figure 20 on page 58), check your hardware connections and click Restart the Internet/ Wireless Setup Wizard to have the ZyXEL Device detect your connection again.
Figure 20 Auto Detection: No DSL Connection
If the wizard still cannot detect a connection type and the following screen appears (see Figure 21 on page 59), click Next and refer to Section 3.2.2 on page 59 on how to configure the ZyXEL Device for Internet access manually.
58 |
| |
| ||
|
|
|