Sony AV-DV75 manual Specifications, FM tuner section, AM tuner section, Amplifier, General

SPECIFICATIONS

FM tuner section
Tuning	range	87.5	MHz to 108 MHz
Usable	sensitivity	13.2	dBf
(IHF)
Antenna	terminals	75 ohms		(unbalanced)

AM tuner section
Tuning	range	530	kHz to 1710 kHz (10 kHz step),
		531 kHz to 1602 kHz (9 kHz step)
Usable	sensitivity	350	pV/m
Antenna		Loop antenna

Amplifier	section
Power output	[Stereo Mode]
	Front
	170 watts per channel, Min. RMS at 8
	ohms, from 40 Hz to 20 kHz, with no
	more than 0.9’7. Total Harmonic
	Distortion
	[Dolby Digital Surround or Dolby
	Pro Logic Mode]
	Front
	120 watts per channel, Min. RMS at 8
	ohms, from 40 Hz to 20 kHz, with no
	more than 0.9% Total Harmonic
	Distortion
	Rear (Surround)
	120 watts per channel, Min. RMS at 8
	ohms, 1 kHz, with no more than 0.9’%
	Total Harmonic	Distortion
	Center
	120 watts, Min. RMS at 8 ohms, 1
	kHz, with no more than 0.9% Total
	Harmonic Distortion
Total harmonic	0.15 % (85 W, 1 kHz, 8 ohms, Front)
distortion
Inputs	AUDIO IN
	PHONO: 2.5 mV, adjustable (47
	kohms)
	CD: 250 mV, adjustable (47
	kohms)
	TAPE MONITOR: 350 mV,
	adjustable	(47 kohms)
	VIDEO l/DVD/MD,		VIDEO 2/LD/
	TV, VIDEO 3, AUX: 250 mV,
	adjustable	(47 kohms)
	DIGITAL IN
	COAXIAL	(VIDEO 2):
	OPTICAL	(VIDEO	1):
	OPTICAL	(VIDEO 3):
	accept linear PCM (32 kHz, 44.1

kHz and 48 kHz) signals and bit stream of Dolby Digital Surround

VIDEO IN: 1 Vp-p (75 ohms)

outputs	AUDIO OUT (REC OUT): 200 mV (1
	kohm)
	VIDEO OUT (MONITOR): 1 Vp-p (75
	ohms)
	SUPER WOOFER: 5.0 V
	FRONT SPEAKERS IMP: 8CU4f2
	selectable (front speakers A and B):
	with the SPEAKER IMPEDANCE
	SELECTOR set to 4Q accepts
	speakers of 4 ohms.
	with the SPEAKER IMPEDANCE
	SELECTOR set to 8Q accepts
	speakers of 8 ohms or more.
	SURROUND SPEAKERS IMP: 8Q
	(surround speakers): accepts
	speakers of 8 ohms or more
	CENTER SPEAKER IMP: 8Q/4Q
	selectable
	with the SPEAKER IMPEDANCE
	SELECTOR set to 4!2, accepts
	speaker of 4 ohms.
	with the SPEAKER IMPEDANCE
	SELECTOR set to 8Q accepts
	speaker of 8 ohms or more.
	PHONES (stereo jack): accepts
	headphones of 32 ohms or more
Muting	-20 dB

General

Power requirements	120	VAC,	60 iiz
Power consumption	230	W
Dimensions	430	x 155 x 385 mm
(W XHXD)	(i7x61/s		x15’/4 in.)
Weight	12 kg (26		lb 7 OZ.)

Specifications and external appearance are subject to change without notice.

MMESYSTEM

The word “BBE”and the “BBEsymbol” are trademarks of BBE Sound, Inc.

Under license from BBE sound, Inc.

Manufactured under license from Dolby Laboratories. “Dolby”,“ProLogic” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. 01992- 1997 Dolby Laboratories, Inc. All rights reserved.

2 i ENGLISH