Husqvarna DT22 manual Movement/Transport, Storage, Children

Page 11

SAFETY INSTRUCTIONS

Movement/Transport

To turn and steer the machine, press down on the handle and turn on the back wheels.

Turn off the engine and allow it to cool at least 2 minutes before transport.

Collapse the handle if the machine is equipped with a collapsible handle.

Be careful and use safe lifting and moving techniques when loading/unloading the machine.

We recommend having two people to lift the machine.

Fasten the machine properly in place with approved fasteners, such as tension belts, chains or rope. Always check that you are in compliance with applicable traffic regulations before transporting the machine.

Storage

Allow the engine to cool before storing the machine. Never store the machine near a open flame.

Store the machine with the fuel valve closed.

Store the machine and fuel in such a way that there is no risk that leaking fuel or fumes can come in contact with flames or sparks from electrical machines, electric engines, relays, switches, boilers or similar.

Store the machine in a locked space away from children and adults untrained in use of the machine.

Children

Serious accidents can occur if you fail to be on guard for children in the vicinity of the machine. Never assume that children will stay put where you last saw them.

Keep children away from the machine.

Keep children away from the work area and under close supervision by another adult.

Keep an eye out and shut off the machine if children enter the work area.

Never allow children to operate the machine.

Be particularly careful near corners, bushes, trees or other objects that block your view.

8011-090

We recommend having two people to lift the machine.

8011-038

Keep children away from the machine.

8011-039

Keep children away from the work area.

11

Image 11
Contents DT22 Table of Contents Introduction Decals and machine-bound instructions Symbols and DecalsLocation of decals Translation of instructions Decal Seed application chartGeneral use Safety InstructionsSafety Instructions Preparations Running Children Movement/TransportStorage Fuel system Maintenance Presentation PresentationMain components and operating instruments Throttle control EngineChoke StarterStarter handle Fuel valveOil drainage Spark plugMuffler Oil dipstickFueling Fuel tankClutch Cutting unit Depth leverDepth knob Depth lockDelta blade Setting blade heightBlade versatility Flail bladeStarting the engine OperationCutting the engine Finishing Before you startStarting Maintenance schedule MaintenanceReplacing the air filter Idle adjustment Cleaning the sludge reservoirFitting the wrong spark plug type can damage the engine Ignition systemReplacing the drive belt Cutting unitChecking the drive belt Wear/Rotation/Replacing flail blades Replacing worn flail blades When tipping the machine forward observe the Two minute ruleSpring Tine Screw Wear/Replacing delta bladesScrews Delta Blade Nuts Wear/Replacing spring tinesTwo minute rule Cleaning and washingGeneral LubricationLubrication schedule Checking the engine’s oil level Engine oilHandle Depth knob with depth lockBlades Depth leverSymptom Cause Engine will not start TroubleshootingWinter storage ServiceStorage Specifications DT22 Technical DataAssembly delivery service Assembly InstructionsAssembly directions, catcher bag Bagger AssemblyAttach the chute to the mainframe Extender Wire tie the cable to the handle. See Collection conditions Correct height settingInstructions for the catcher bag Do not use or start the engine until the seeder is in place Seeder AssemblyRe-attach rubber flap rod with push nut to Seed Gate Cable Clamp Instructions for the seeder Adjusting the seed hopperAfter the first 20 hours Service JournalDelivery service Vibraton Level Sound TestPage Page ´z+H3J¶6T¨ Page 2003W10 114 01