Husqvarna DT22 manual Preparations

Page 9

SAFETY INSTRUCTIONS

Preparations

Make sure that you always have first aid equipment at hand when using the machine.

Make sure nobody else is in the vicinity of the machine when you start the engine, engage the drive or run the machine.

Make sure animals and people maintain a safe distance from the machine.

Clear the area of objects such as stones, toys, steel wire, etc. that could become caught in moving machine parts and thrown out.

Find and locate all fixed objects in the ground, such as sprinkler systems, poles, water valves, bases for washing lines, etc. Be certain to check for hidden electrical cables or similar in the surface of the lawn. Always run the machine around these objects. Never intentionally run the machine over foreign objects.

Make sure all guard plates and protective cowlings are in place and intact when using the machine.

Makes sure no clothing, long hair or jewelry can catch in moving machine parts.

Never use the machine when barefoot. Always wear protective shoes or protective boots with anti-slip and preferably with steel toes.

Wear approved ear-protection when running the machine. Ask your dealer about approved ear-protection.

WARNING!

Always use approved protective clothing and approved protective equipment when using the machine. Protective clothing and protective equipment cannot eliminate the risk of accidents, but wearing proper clothing and the correct equipment will reduce the degree of injury should an accident occur. Ask your dealer about approved protective clothing and approved protective equipment recommended by Husqvarna.

8011-198

8011-292

9

Image 9
Contents DT22 Table of Contents Introduction Decals and machine-bound instructions Symbols and DecalsLocation of decals Translation of instructions Decal Seed application chartGeneral use Safety InstructionsSafety Instructions Preparations Running Movement/Transport StorageChildren Fuel system Maintenance Presentation PresentationMain components and operating instruments Throttle control EngineStarter handle StarterFuel valve ChokeMuffler Spark plugOil dipstick Oil drainageFueling Fuel tankDepth knob Cutting unit Depth leverDepth lock ClutchBlade versatility Setting blade heightFlail blade Delta bladeStarting the engine OperationCutting the engine Before you start StartingFinishing Maintenance schedule MaintenanceReplacing the air filter Idle adjustment Cleaning the sludge reservoirFitting the wrong spark plug type can damage the engine Ignition systemCutting unit Checking the drive beltReplacing the drive belt Wear/Rotation/Replacing flail blades Replacing worn flail blades When tipping the machine forward observe the Two minute ruleScrews Delta Blade Wear/Replacing delta bladesNuts Wear/Replacing spring tines Spring Tine ScrewTwo minute rule Cleaning and washingLubrication Lubrication scheduleGeneral Checking the engine’s oil level Engine oilBlades Depth knob with depth lockDepth lever HandleSymptom Cause Engine will not start TroubleshootingService StorageWinter storage Specifications DT22 Technical DataAssembly delivery service Assembly InstructionsAssembly directions, catcher bag Bagger AssemblyAttach the chute to the mainframe Extender Wire tie the cable to the handle. See Correct height setting Instructions for the catcher bagCollection conditions Do not use or start the engine until the seeder is in place Seeder AssemblyRe-attach rubber flap rod with push nut to Seed Gate Cable Clamp Instructions for the seeder Adjusting the seed hopperService Journal Delivery serviceAfter the first 20 hours Vibraton Level Sound TestPage Page ´z+H3J¶6T¨ Page 2003W10 114 01