Husqvarna DT22 manual Presentation

Page 14

PRESENTATION

Presentation

Congratulations on your choice of an exceptionally high quality product. This operator’s manual describes the Husqvarna dethatcher. The machine is available in one basic design—DT22.

The machine is equipped with a 5.5 hp Honda four-cycle engine.

DT22 can be equipped with a catcher. It is available as an accessory at your Husqvarna dealer. It can be mounted aftermarket; see the chapter ”Assembly instructions/Assembly directions, catcher bag

Alternatively, DT22 can be equipped with a seeder. It is available as an accessory at your Husqvarna dealer. It can be mounted aftermarket; see the chapter ”Assembly instructions/Assembly directions, seed hopper SD22”.

It is not possible to use a catcher and seeder simultaneously.

DT03

DT02

DT22RF

14

Image 14

Contents DT22 Table of Contents Introduction Symbols and Decals Decals and machine-bound instructionsLocation of decals Decal Seed application chart Translation of instructionsSafety Instructions General useSafety Instructions Preparations Running Children Movement/TransportStorage Fuel system Maintenance Presentation PresentationMain components and operating instruments Engine Throttle controlFuel valve StarterStarter handle ChokeOil dipstick Spark plugMuffler Oil drainageFuel tank FuelingDepth lock Cutting unit Depth leverDepth knob ClutchFlail blade Setting blade heightBlade versatility Delta bladeOperation Starting the engineCutting the engine Finishing Before you startStarting Maintenance Maintenance scheduleReplacing the air filter Cleaning the sludge reservoir Idle adjustmentIgnition system Fitting the wrong spark plug type can damage the engineReplacing the drive belt Cutting unitChecking the drive belt Wear/Rotation/Replacing flail blades When tipping the machine forward observe the Two minute rule Replacing worn flail bladesNuts Wear/Replacing spring tines Wear/Replacing delta bladesScrews Delta Blade Spring Tine ScrewCleaning and washing Two minute ruleGeneral LubricationLubrication schedule Engine oil Checking the engine’s oil levelDepth lever Depth knob with depth lockBlades HandleTroubleshooting Symptom Cause Engine will not startWinter storage ServiceStorage Technical Data Specifications DT22Assembly Instructions Assembly delivery serviceBagger Assembly Assembly directions, catcher bagAttach the chute to the mainframe Extender Wire tie the cable to the handle. See Collection conditions Correct height settingInstructions for the catcher bag Seeder Assembly Do not use or start the engine until the seeder is in placeRe-attach rubber flap rod with push nut to Seed Gate Cable Clamp Adjusting the seed hopper Instructions for the seederAfter the first 20 hours Service JournalDelivery service Sound Test Vibraton LevelPage Page ´z+H3J¶6T¨ Page 114 01 2003W10